All Welded Plate & Shell Heat Exchangers Perth WA - Welded Plate & Shell Heat Exchanger Perth Western Australia

Come and See us

Office
6/12 Carole Road
Maddington
Western Australia 6109

+61 8 9493 2900
+61 8 9493 3900
enquiry at hewa dot com dot au

Enquiry Form

Please answer the following question before any enquiry.
Are you inquiring about a plate and frame type heat exchanger?
Yes No
Sorry, we only deal with plate heat exchangers, we cannot help you with other type of heat exchangers such as shell and tube, coil or fin type.
Are you using non refrigerant gas or air as one of the fluid?
Yes No
Sorry, we cannot help you with a gas or air application, the fluid used must be a liquid or a refrigerant.

Name
Phone
Email Address
Enquiry

All Welded Plate & Shell

This heat exchanger essentially works in the same way as an ordinary shell and tube unit, but is more efficient because plates have been used instead of tubes. The plates are laser/TIG welded together to form a plate pack, which is then mounted inside a traditional cylindrical shell.

This system can offer substantial savings over conventional shell and tube exchangers due to the efficiency of the plate pack compared to a system of tubes. Operational advantages of the plate and frame heat exchanger include:

No gaskets
High working temperatures up to 250°C
High working pressure up to 25 bar
Small liquid hold up volume
Small space requirement (takes up only 30% of the space of a traditional shell and tube unit)
The plate pack is much more easily serviced and repaired than the components of a shell and tube exchanger.

For more information on this product, please complete our enquiry form which is on the right hand side of this page. Someone will be in contact with you as soon as possible. Thank you.